Mending Minor Tears: A Guide to Repairing Silicone and TPE Love Dolls

As time goes on, your beloved silicone or TPE doll might face some wear and tear due to frequent usage, mishandling, or even aging. But don’t worry! Minor tears or damages on your TPE or silicone sex dolls can often be repaired at home. Here is a step-by-step guide to help you mend the small torn parts.

Tool You Might Need

Isopropyl alcohol (for cleaning)
TPE glue
Cotton swab
Spatula (for scraping)
Gloves

Steps for Mending Torn Parts

1. Clean the Area: Clean the damaged area of the tear thoroughly using isopropyl alcohol to remove any oils and dust particles. Use a cotton swab for a precise application.
2. Apply the Glue: Carefully apply the right amount of TPE glue to the damaged part, be sure to cover the tear fully and blend the edges for a seamless look, and don’t forget to remove the excess.
3. Curing Time: Let the glue naturally dry and cure completely for at least 30 minutes.

Tool You Might Need

Isopropyl alcohol (for cleaning)
Silicone glue
Silicone color-matching pigment
Cotton swab
Spatula (for scraping)
Gloves

Steps for Mending Torn Parts

1. Clean the Area: Just like with TPE dolls, clean the tear thoroughly.
2. Mix Glue and Pigment: Mix a small amount of silicone glue with the silicone pigment that matches your doll’s skin color at a 1:1 ratio.
3. Apply the Mixture: Apply the mixture to the tear, making sure to fill it completely and remove the excess too.
4. Curing Time: Let the mixture dry and cure for around 6-8 hours. It takes more time than TPE glue.

Remember, while these methods can effectively repair minor tears if your doll has severe damage, it might be best to consult with a professional or contact us. Always handle your doll with care to prevent future damage, and store it properly when not in use.

This way, your love doll can continue to be a source of joy and companionship for years to come!