Description
Device Connection
1. Connect the power cord to the control host;
2. Connect the data cable of the cleaning jet to the control host;
3. Connect the water pipes (one for the water inlet, the other one for the water outlet);
4. Put the inlet pipe into the clean warm water with mild cleaning solutions and place the outlet pipe into a waste water container;
5. Insert the cleaning jet into the doll’s vagina then operate the cleaning device to start cleaning.
Operation
The WM intelligent cleaning set has 1 automatic mode and 4 semi-automatic modes (including cleaning mode, ultrasonic vibration mode, driving mode and ultraviolet disinfection mode).
1. Automatic Mode
Long press the power button for 3 seconds to start up the device, press A to enter “Automatic Mode”, then press the “Start” button to clean automatically, the auto cleaning process has 3 stages:
* Washing + Ultrasonic cleaning: 10 minutes
* Drying + Ultrasonic Vibration: 20 minutes
* Drying + UV disinfection: 20 minutes
2. Semi-Automatic Mode
After startup, press M to enter the “Semi-Automatic Mode”,
* press W then the “Start” button to enter “Cleaning Mode”: 30 minutes
* press D then the “Start” button to enter “Drying Mode”: 60 minutes
* press UW then the “Start” button to enter “Ultrasonic Vibration Mode”: 30 minutes
* press UV then the “Start” button to enter “Ultraviolet Disinfection Mode”: 20 minutes
Safety Information
1. Do not clean the device host with water.
2. To prevent damage to the equipment, please ensure that the water inlet pipe is put into the water before use.
3. The cleaning jet’s dustproof and waterproof grade is IP68, which can be washed.
4. The water used for cleaning should not be less than 5.5L.
5. There should be no debris larger than 1mm in diameter in the clear water.
6. The capacity of the wastewater tank shall not be less than 5.5L.
7. The depth of the cleaning jet inserted into the doll’s vagina should be 2-5 segments, not too shallow.
8. When inserted, the drain pipe faces down.
9. When the cleaner is working, make sure that all rubber tubes are unblocked and can not be bent.
10. After cleaning, you can use the drying rod included or a Water Dry Diatomite Stick Rod or USB Heating Rod to dry the vagina. They are reusable.
11. There may be a small amount of water remaining inside the machine due to the test before leaving the factory, which is normal.
Note: If your doll has a whole-body heating function or other electronic function, it’s not recommended to use this cleaning machine!